What is the process of stateful DHCPv6 for IPv6?
Stateful DHCPv6 is the exact porting of DHCP into the IPv6 world. With this approach, a DHCPv6 server handles leases and extra information, just like traditional IPv4 DHCP. The client starts again with a Router Solicitation, but this time the Advertisement in reply contains the managed-config set to 1.
How do I use DHCPv6?
DHCPv6 is a method to assign IPv6 addresses automatically to network clients….Configure DHCPv6 Server Settings
- Edit a trusted, optional, or custom interface.
- Select the IPv6 tab.
- Select Enable IPv6.
- From the DHCP drop-down list, select Use DHCP Server. The DHCP server configuration settings appear.
What are the new features of DHCPv6?
9. IPv6 Features
- New Header Format.
- Larger Address Space.
- Efficient and Hierarchical Addressing and Routing Infrastructure.
- Stateless and Stateful Address Configuration.
- Built-in Security.
- Better Support for QoS.
- New Protocol for Neighboring Node Interaction.
- Extensibility.
How many DHCP messages are there?
IP address is assigned from a pool of addresses. In DHCP, the client and the server exchange mainly 4 DHCP messages in order to make a connection, also called DORA process, but there are 8 DHCP messages in the process.
What is DHCPv6?
DHCPv6 – The Wireshark Wiki DHCPv6 The Dynamic Host Configuration Protocol for IPv6 (DHCP) enables DHCP servers to pass configuration parameters such as IPv6 network addresses to IPv6 nodes. It offers the capability of automatic allocation of reusable network addresses and additional configuration flexibility.
What is DHCPv6 stateless address autoconfiguration?
This protocol is a stateful counterpart to “IPv6 Stateless Address Autoconfiguration” (RFC 2462), and can be used separately or concurrently with the latter to obtain configuration parameters. To Understand DHCPv6 key point to Remember 1. UDP Ports : Clients listen for DHCP messages on UDP port 546.
How to understand DHCPv6 key point to remember?
To Understand DHCPv6 key point to Remember 1. UDP Ports : Clients listen for DHCP messages on UDP port 546. Servers and relay agents listen for DHCP messages on UDP port 547.
What is the IPv6 equivalent of the dynamic host configuration protocol?
It is the IPv6 equivalent of the Dynamic Host Configuration Protocol for IPv4 . IPv6 hosts may automatically generate IP addresses internally using stateless address autoconfiguration (SLAAC), or they may be assigned configuration data with DHCPv6.