Skip to main content

What is the default password for HP ProCurve switch?

Eleanor O'Neill Useful tips

What is the default password for HP ProCurve switch?

blank
Using the Console Setup screen

Parameter Default
Manager Password blank
Logon Default CLI
Time Zone 0 (none)
Community Name public

How do I reset my HP ProCurve password?

Solution: You can clear the switch password by pressing the recessed Clear button on the front of the switch. This action deletes all password and user name protection from all of the switch’s interfaces.

How do I reset my HP ProCurve 2824 to factory settings?

To execute the factory default reset on the switch, perform these steps:

  1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button.

How do I log into my HP ProCurve switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

How do I factory reset my HP switch?

Solution:

  1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button.

What is the default IP of HP switch?

192.168.2.10
The HP ProCurve Switch 1700 Series has a default IP address of 192.168. 2.10 with a subnet mask of 255.255.

How do I setup my HP ProCurve switch?

How to: Configure a HP ProCurve switch

  1. Step 1: Connect your serial connection.
  2. Step 2: Conenct PuTTY.
  3. Step 3: Get the IP address.
  4. Step 4: Set time server.
  5. Step 5: Set SNMP community info.
  6. Step 6: Launch the web GUI.
  7. Step 7: Configure basic info.
  8. Step 8: Create VLANs.

How do I configure my HP ProCurve switch?

How do I find my HP printer’s password?

Right-click the name of your wireless network, and then click Status. Under Connection, click Wireless Properties. Click the Security tab, and then select the Show characters check box to show the password.

What is HP ProCurve switch?

The HP ProCurve Switch 2800 Series consists of two switches: the 24-port HP ProCurve Switch 2824 with 20 10/100/1000 ports, and the 48-port HP ProCurve Switch 2848 with 44 10/100/1000 ports. In addition, each switch has four dual-personality ports for RJ-45 10/100/1000 or mini-GBIC connectivity.

How do I reset my HP switch?

What is HP default password?

The default administrator or root password for all HP-provided Build Plans is: ChangeMe123! CAUTION: HP strongly recommends changing this password before deploying to any servers. See Set (encrypt) the administrator/root password for details.

What is the default HP BIOS password?

There is no default password for any HP BIOS.

What is HP printer default password?

🛑The default username and password for your printer would be blank or admin for both username and password. However, if you still have issues try performing a factory reset on your printer and check if it helps. 1. From the product control panel, press the Setup button.

What is the default password for HP Wireless printer?

12345678
If prompted for a password, type 12345678. This is the default password to log in. If you created a custom password and do not remember it, go to your printer to get the password. Press the Wireless and Information buttons at the same time.

How do I reset my HP ProCurve 1800 switch to factory settings?

How do I reset factory defaults on the ProCurve 1800 Series Switches?

  1. Remove the power cord from the back of the switch.
  2. Connect port 1 to port 2 on the front panel, using a standard network cable.
  3. Reconnect the power cord to the rear of the switch.
  4. Wait at least 40 seconds before disconnecting port 1 from port 2.

How many ports does the HP ProCurve switch 2824 have?

HP Procurve Switch 2824 J4903A The HP ProCurve Switch 2800 series consists of two switches: the 24-port HP ProCurve Switch 2824 with 20 10/100/1000 ports, and the 48-port HP ProCurve Switch 2848 with 44 10/100/1000 ports. In addition, each switch has 4 dual-personality ports for 10/100/1000 or mini-GBIC connectivity.

What is the default password for HP ProCurve 2650?

Default for HP Procurve 2650 is no user names or passwords set. You should be able to reset the passwords without killing your port configurations: and holding the Clear button for a minimum of one second. This action deletes console and the web browser interface.

How to reset the 2824 Switch factory default user name and password?

Re: 2824 switch factory default user name & password 1 Press and hold the Reset button. 2 While holding the Reset button, press and hold the Clear button. 3 Release the Reset button and wait for about one second for the Self-Test LED to start flashing. 4 When the Self-Test LED begins flashing, release the Clear button

What is the default username for the HP 2920-24g?

What HP do not tell you is that once the Swith is configured via the CLI with a new password when you login to the switch via the web interface the default username for the HP 2920-24G is manager. Hope this helps someone in future. 09-12-2019 10:59 AM