Skip to main content

Can you convert AO Smith water heater to propane?

Can you convert AO Smith water heater to propane?

A.O. SMITH WILL ONLY ALLOW THE CONVERSION OF GAS WATER HEATERS FROM LP GAS (PROPANE) TO NATURAL GAS. THE CONVERSION OF A GAS WATER HEATER FROM NATURAL GAS TO LP GAS (PROPANE) IS NOT ALLOWED UNDER ANY CIRCUMSTANCES.

Can I convert a natural gas water heater to propane?

CAUTION: The water heater is factory set to burn natural gas, but can be converted to burn LP gas. Before putting the water heater into operation, verify that the type of gas supplied to your water heater and the type of gas your water heater is set to burn are the same.

How do you change a water heater orifice?

How to Remove and Clean a Pilot Orifice

  1. The pilot orifice is located at the end of the pilot supply line.
  2. This is the orifice up close.
  3. Remove the burner from the water heater.
  4. Turn the burner upside down and remove.
  5. Flip the burner back over and raise the.
  6. Remove the orifice with a box end wrench.
  7. The orifice removed.

Can you convert a AO Smith natural gas to propane?

THE CONVERSION OF A GAS WATER HEATER FROM NATURAL GAS TO LP GAS (PROPANE) IS NOT ALLOWED UNDER ANY CIRCUMSTANCES. A.D. Smith will provide kits as demand warrants through our Parts Department, phone no.

Can you use a natural gas valve with propane?

To get the same heating value, a natural gas orifice has to be smaller than a propane one, because natural gas is fed at a smaller pressure. If you change the orifice on the gas valve you can convert a natural gas appliance to a propane one.

Can I hook up a propane tank to my water heater?

You can connect a propane tank of nearly any size to your household hot water heater as long as you satisfy three conditions: You need to install a pressure regulator between the tank and hot water heater, ensure that the hot water heater is equipped for propane rather than natural gas, and maintain the correct safe …

How do you hook up a propane water heater?

Tank Water Heater Installation

  1. Drain the Tank.
  2. Disconnect Gas and Water Lines.
  3. Detach Gas Exhaust from Vent Hood.
  4. Set the New Heater in Place.
  5. Attach Heat Trap Fittings and Water Line Connections.
  6. Connect the Gas Supply to the New Heater.
  7. Test for Leaks.
  8. Light Pilot and Switch Control Knob to “On”.

How much does it cost to convert from natural gas to propane?

A few natural gas utilities or companies will do the conversion for free, so be sure to ask your particular gas supplier if this is a service they offer. Conversion Professionals would charge anywhere between $150 and $300, could be more, could be less, however, most will usually charge between that.

Can you convert propane to natural gas at AD Smith?

A.O. SMITH WILL ONLY ALLOW THE CONVERSION OF GAS WATER HEATERS FROM LP GAS (PROPANE) TO NATURAL GAS. THE CONVERSION OF A GAS WATER HEATER FROM NATURAL GAS TO LP GAS (PROPANE) IS NOT ALLOWED UNDER ANY CIRCUMSTANCES. A.D. Smith will provide kits as demand warrants through our Parts Department, phone no. 1-800-433-2545.

Can a gas water heater be converted to propane?

THE CONVERSION OF A GAS WATER HEATER FROM NATURAL GAS TO LP GAS (PROPANE) IS NOT ALLOWED UNDER ANY CIRCUMSTANCES. A.D. Smith will provide kits as demand warrants through our Parts Department, phone no. 1-800-433-2545. Prices, dimensions and specifications are subject to change without notice.

Why AO Smith water heaters?

As the inventor of a patented glass coating process, A.O. Smith knows like no other how to maximize the lifetime and quality of glass lined-steel water heating appliances. A.O. Smith offers a wide range of water heaters. Through constant innovation, at production level and application level, A.O. Smith maintains its leading position in the market.

Why choose AO Smith?

Through constant innovation, at production level and application level, A.O. Smith maintains its leading position in the market. This applies both to the choice of materials and components used in the manufacturing process, as well as to the efficiency of the finished products.