What are 10 parameter urinalysis test strips?
The Rapid ResponseTM 10 Parameter Urinalysis Reagent Strip is a fast, qualitative and semi-quantitative, dip-and-read test for the detection of Glucose, Bilirubin, Ketone (Acetoacetic acid), Specific Gravity, Blood, pH, Protien, Urobilinogen, Nitrite and Leukocytes in urine, to aid in the general evaluation of health …
How do you read a reagent strip for urinalysis?
Immerse the reagent area of the strip in the urine specimen and take it up quickly and immediately 3. Run the edge of the strip against the rim of the container to remove the excess urine 4. Hold the strip up horizontally and compare the result on the strip with the colour chart on the bottle label closely.
What reagent strip indicates bacteria in the urine?
The test for nitrites is a rapid screening method for possible asymptomatic infections caused by nitrate-reducing bacteria.
What can a reagent strip detect?
Diagnostic reagent strips are commonly used in clinical analysis of urine and blood, in particular for monitoring glucose concentration. Results are obtained instrumentally or visually as thresholds and quantitative outputs.
What are the 10 parameters?
10 Parameter Urinalysis Reagent Test Strips
- Leukocytes.
- Nitrite.
- Urobilinogen.
- Protein.
- pH.
- Blood.
- Specific Gravity.
- Ketone.
What are normal urine dipstick results?
Normal urinary proteins values are less than 150 mg/d and are undetectable using urinary dipstick. The urinary dipstick only detects the presence of albumin and no other proteins. When urinary protein values exceed 300-500 mg/d, the dipstick test result becomes positive.
What indicates a UTI on a dipstick?
If dipstick is positive for nitrite or leukocyte and red blood cells (RBC) UTI is likely. A urine sample (morning sample most reliable) for culture and sensitivities should be sent if previous antibiotic treatment has failed or there is a possibility of antibiotic resistance.
What are normal values for urinalysis?
It also reflects the concentrating ability of the kidneys. Normal USG can range from 1.003 to 1.030; a value of less than 1.010 indicates relative hydration, and a value greater than 1.020 indicates relative dehydration.
What urinalysis indicates UTI?
Either nitrites or leukocyte esterase — a product of white blood cells — in your urine might indicate a urinary tract infection.
What do the colors mean on a UTI test strip?
The test is a firm plastic strip onto which Leukocyte and Nitrite test pads are attached. If the test is positive, the Leukocyte test pad should be beige to dark purple, and the Nitrite test pad should be uniform pink to red.
What indicates a UTI on a urinalysis?
Evidence of infection. Either nitrites or leukocyte esterase — a product of white blood cells — in your urine might indicate a urinary tract infection.
What does it mean if my urine pH is 9?
Urine has the highest range of pH compared to other bodily fluids. The American Association for Clinical Chemistry says the normal urine pH range is between 4.5 and 8. Any pH higher than 8 is basic or alkaline, and any under 6 is acidic. A urine pH test is carried out as a part of a urinalysis.
What level of bacteria in urine indicates infection?
Bacterial colonization in urine is high when the level of bacterial counts is elevated— meaning the number of colonies of a single organism is higher than 100,000 per mL. If the bacteria level in your urine is high and it’s causing physical symptoms, you have a symptomatic urinary tract infection (UTI).
How do you read a urine infection report?
What does the test result mean?
- Positive urine culture: Typically, the presence of a single type of bacteria growing at high colony counts is considered a positive urine culture.
- Negative urine culture: A culture that is reported as “no growth in 24 or 48 hours” usually indicates that there is no infection.